106
Product
1
30
26
NEW
What we highly recommend for the oil drain system is this magnetic oil drain plug. This is a great thing to have if it collects the dirty metal filings in the engine and they can't continue to wander around in the oil system and increase wear. We would put this in every engine.
In stock
Bruttó ár: 2 590 Ft / db
Bruttó ár: 3 520 Ft / db
30
Available to order
Bruttó ár: 39 290 Ft / db
Bruttó ár: 56 230 Ft / db
26
As a perfect addition to your custom build, you will find this EMPI GTV part. With this distributor you can connect 3 different sensors to the same oil pressure line. Bronze plated and designed with CAD software, you can be sure of a perfect fit and durability. The stylish EMPI logo gives a tasteful overall look! No need to search the internet for this EMPI jewel in NOS! All threads are 1/8-27 NPT. For all air-cooled Typ1 and Typ4 engines.
In stock
Bruttó ár: 18 890 Ft / db
Bruttó ár: 25 720 Ft / db
15
In stock
Bruttó ár: 9 990 Ft / db
Bruttó ár: 11 790 Ft / db
16
Large capacity oil sump 3.3L
1810-500
In stock
Bruttó ár: 104 990 Ft / db
Bruttó ár: 125 690 Ft / db
34
Oil thermostat, EMPI
1870
Oil thermostat with fittings and clamps. Mounts in line and bypasses the oil cooler until the oil reaches approximately 79 degrees
In stock
Bruttó ár: 55 540 Ft / db
Bruttó ár: 84 340 Ft / db
30
In stock
Bruttó ár: 7 440 Ft / folyóméter
Bruttó ár: 10 630 Ft / folyóméter
32
There is a temperature switch in the oil system, which switches, for example, the oil cooling fan under part number 1871.
In stock
Bruttó ár: 25 190 Ft / db
Bruttó ár: 37 480 Ft / db
18
The screws that go with it are 1805-500. The gasket is 1805-02 or 1805-03. The one-piece SALE does not have the threaded outlet, it is 1808-150, you can buy it separately. There will be no more of these, only at Empi. Last BUGPACT made in USA!!
In stock
Bruttó ár: 30 440 Ft / db
Bruttó ár: 37 480 Ft / db
46
Oil pump cover, EMPI (rimless)
1805-01EMPI
The corresponding screws are 1805-500. The gasket is 1805-02 or 1805-03.
In stock
Bruttó ár: 3 710 Ft / db
Bruttó ár: 6 930 Ft / db
15
Oil pump for camshafts with 8mm stud, 21mm gear and 3 rivets from before 70. If you couldn't identify it this way, it's worth bringing the original with you when buying.
In stock
Bruttó ár: 19 900 Ft / db
Bruttó ár: 23 440 Ft / db
7
In stock
Bruttó ár: 49 900 Ft / db
Bruttó ár: 53 890 Ft / db
29
This pump is also needed for sports camshafts!!
In stock
Bruttó ár: 40 990 Ft / db
Bruttó ár: 58 200 Ft / db
22
Among others, for the 1871 oil cooler
In stock
Bruttó ár: 6 520 Ft / pár
Bruttó ár: 8 430 Ft / pár
42
EMPI is the Discount! The original price is VDO.
In stock
Bruttó ár: 12 990 Ft / db
Bruttó ár: 22 430 Ft / db
10
In stock
Bruttó ár: 8 390 Ft / db
Bruttó ár: 9 370 Ft / db
47
VDO, EMPI 149C, M14x1.5
In stock
Bruttó ár: 23 480 Ft / db
Bruttó ár: 44 650 Ft / db
16
Available to order
Bruttó ár: 46 720 Ft / db
Bruttó ár: 56 230 Ft / db
32
VDO Oil pressure sensor, 80 PSI, M10x1.0, 2-pin, VDO
In stock
Bruttó ár: 43 990 Ft / db
Bruttó ár: 65 420 Ft / db
NEW
Oil filler cap gasket
1847-550
A klasszikus Volkswagenek főként acél olajbetöltő sapkával rendelkeznek, mint például a Bogarak, a korai buszok, az álló motorral szerelt, kiugró ablakokkal szerelt autók stb., de a 4-es típusú motorral, a Wasserboxerrel és a későbbi dízelekkel szerelt Volkswagenek műanyag olajbetöltő sapkával rendelkeznek. Most már van ez az olajtömítés ezekhez a műanyag sapkákhoz, és a teljes VAG-csoport legtöbb műanyag olajbetöltő sapkájához illeszkedik! Egy nagyon univerzális termék, hihetetlenül kedvező ...
In stock
Bruttó ár: 390 Ft / db
NEW
This reinforced hose can withstand up to 10 Bar of oil pressure, but remains flexible so it can be laid without bending. Ideal for connecting external oil coolers, filters and thermostats.
In stock
Bruttó ár: 4 680 Ft / folyóméter
NEW
This is a paper gasket set, which also includes the copper compression washers. If necessary, you can also find the drain screws in pieces, the middle screw is part number 1850, we highly recommend the magnetic one, or you can find the end closed nuts under part number 1857.
In stock
Bruttó ár: 560 Ft / pár
NEW
Draining the engine oil on Type 1 engines was previously done from the bottom of the engine case. On Type 1 engines with 25-30 hp, this was done by removing the oil pan plate that also held the oil filter in place. On 1200, 1300, 1500 and 1600 cc engines, there is often a drain plug that can be unscrewed to drain the oil from the engine block without having to remove the plate. These drain covers have long been available as part of the complete oil change kit # 1852 12/13 for 1600 and # 1852-...
In stock
Bruttó ár: 5 140 Ft / db
NEW
The paper gasket set with the copper washers is 1851. The complete set with the filter, screws, drain cover, with a drain screw in the middle, paper and copper gaskets is 1852!! What we highly recommend for the oil drain system is a magnetic oil drain screw with part number 1850. This is a very good thing if it collects the dirty metal filings in the engine and they can no longer wander in the oil system and increase wear. For Type 1 engines, 12/13/15/1600, from 08/60 to the end of production!!
In stock
Bruttó ár: 3 510 Ft / db
NEW
Gasket for the 1829 oil cooler. Also the bracket for the 1823.
In stock
Bruttó ár: 940 Ft / szett
106
Product
1
30