52
Product
31
52
You can replace hardened or fuel vapor damaged gas cap seals to prevent fuel and/or fuel vapors from escaping from the fuel tank. All are available from BBT Manufacturing.
In stock
Bruttó ár: 1 350 Ft / db
Length 205 mm Empty 76 Ohm (-3) Full 4 Ohm (+2)
In stock
Bruttó ár: 24 300 Ft / db
O-Ring Seal for Fuel Tank Sensor Also Fits G60 Supercharger Air Inlet Pipe Provides a Leak-Proof Seal and Optimal Performance This versatile O-Ring seal fits between the fuel tank and sensor, providing a reliable, leak-proof seal to prevent fuel leakage. Made from high-quality rubber, it is also compatible with the G60 supercharger air inlet pipe, ensuring a tight and secure connection. Whether you are replacing a worn seal or performing maintenance, this durable O-Ring is essential to both f...
In stock
Bruttó ár: 990 Ft / db
In stock
Bruttó ár: 10 680 Ft / db
In the T2 08/71- 07/73 model, the gap between the filler neck and the fuel tank is bridged by metal parts and a rubber hose. Due to the effect of fuel and gasoline vapor, these rubber hoses can become brittle, tear and leak. Leakage must be avoided at all costs, as it has caused fires in the engine compartment several times. From now on, we can deliver this filler neck rubber hose, which is connected to the fuel tank, from stock.
In stock
Bruttó ár: 30 370 Ft / db
The gap between the filler neck and the fuel tank of the T2 08/73-07/79 type is bridged by metal parts and a rubber hose. Due to the effect of fuel and gasoline vapor, these rubber hoses can become brittle, tear and leak. Leakage must be avoided at all costs, as it has caused fires in the engine compartment several times. From now on, we can deliver this filler neck rubber hose, which is connected to the fuel tank, from stock.
In stock
Bruttó ár: 15 420 Ft / db
In the T2 -08/71 model, the gap between the filler neck and the fuel tank is bridged by metal parts and a rubber hose. Due to the effect of fuel and gasoline vapor, these rubber hoses can become brittle, tear and leak. Leakage must be avoided at all costs, as it has caused fires in the engine compartment several times. From now on, we can deliver this filler neck rubber hose, which is connected to the fuel tank, from stock.
Available to order
Bruttó ár: 27 570 Ft / db
In the T2 -08/71 model, the gap between the filler neck and the fuel tank is bridged by metal parts and a rubber hose. Due to the effect of fuel and gasoline vapor, these rubber hoses can become brittle, tear and leak. Leakage must be avoided at all costs, as it has caused fires in the engine compartment several times. From now on, we can deliver this filler neck rubber hose, which is connected to the fuel tank, from stock.
In stock
Bruttó ár: 7 270 Ft / db
Available to order
Bruttó ár: 63 000 Ft / db
This is just a small rubber, but it is very important. The metal fuel line runs through the engine compartment heat shield, and this transfer rubber is exactly where it should be. If this rubber is missing or damaged, the fuel line can be damaged by vibration and friction, causing dangerous leaks. Therefore, check if this transfer rubber is present and replace it if it is worn! Replace it if it is missing!
In stock
Bruttó ár: 470 Ft / db
In stock
Bruttó ár: 930 Ft / db
Fuel pipe clamp, Beetle/T2/KG/Typ181
0979-520
In the engine compartment, it is fixed to the left side of the fan housing and keeps the fuel pipe in the correct place. You can prevent the copper pipe from rubbing in the clamp by cutting a small piece of rubber tube and placing it under the clamp. Does not fit 25-30 hp engines.
In stock
Bruttó ár: 930 Ft / db
Get rid of the vibration! This seal is located under the fuel tank, where the fuel hose connects… In addition to the vibration, it is also very important that it does not rub against the casing, thus preventing possible damage to the fuel tank. After all, we do not want any leaks from the tank!
In stock
Bruttó ár: 7 010 Ft / db
52
Product
31
52