79
Product
31
60
2 bearings are required for 1 steering gear. Beetle (not suitable for 1302/03) Karmann Ghia Type 3 Type 34 Type 181
Available to order
Bruttó ár: 56 400 Ft / db
Poor seals allow dirt and moisture to enter the steering box. Replace them in time to ensure proper operation of the steering gear.
In stock
Bruttó ár: 2 340 Ft / db
In stock
Bruttó ár: 9 960 Ft / db
Beetle, Karmann Ghia from 08/65, that's all there is.
In stock
Bruttó ár: 4 680 Ft / db
1302/03 - up to chassis number: 112 2575 327 - up to 72 This larger bushing, which was on the previous stilt cars, is FINALLY available again!!
In stock
Bruttó ár: 12 330 Ft / db
Beetle, Karmann Ghia -62 and 1302/03 -07/74,
In stock
Bruttó ár: 2 340 Ft / db
Beetle, Karmann Ghia from 08/61, Type 3, Type34, Type 181
16x24x7mm
16x24x7mm
In stock
Bruttó ár: 2 340 Ft / db
2 pieces are needed for a steering gear. To close the filler opening. This is needed for all Beetles manufactured after 1961, 14 and 34 Karmann Ghia, Type 181 and all Type 3 steering gears! Also for 1302-03s manufactured until 1974. NOT suitable for rack and pinion steering gears!
In stock
Bruttó ár: 840 Ft / db
11 5/8" - 36 bordás tengely, 1 1/2 fordulat reteszeléstől reteszelésig. Balkormányos járművekhez illeszkedik.
Available to order
Bruttó ár: 104 120 Ft / db
14 5/8" - 36 bordás tengely, 1 1/2 fordulattal rögzíthető.
Available to order
Bruttó ár: 184 050 Ft / db
30x18x7mm
ez van a 1302-03-as kormánymüben felül , alulra pedig használd a 1368-055-t.
ez van a 1302-03-as kormánymüben felül , alulra pedig használd a 1368-055-t.
In stock
Bruttó ár: 1 340 Ft / db
24x37x7mm
In stock
Bruttó ár: 2 340 Ft / db
12x1.5 mm (screws for spindle / pitman arm)
14x1.5 mm (threaded into the pull/push rod sleeve)
Classic Line quality.
VW Type 1, Beetle, NOT FIT FOR 1303 1.2-1.6 06/68-12/86
VW Karmann Ghia 1.3-1.6 06/68-07/74
VW 181 1.5-1.6 09/69-02/79
Porsche 356 /A/B/C 1.1-1.6 01/50-12/65
VW Buggy 1.2-1.6 06/68-07/71
VW Baja 1.2-1.6 08/68-12/86
14x1.5 mm (threaded into the pull/push rod sleeve)
Classic Line quality.
VW Type 1, Beetle, NOT FIT FOR 1303 1.2-1.6 06/68-12/86
VW Karmann Ghia 1.3-1.6 06/68-07/74
VW 181 1.5-1.6 09/69-02/79
Porsche 356 /A/B/C 1.1-1.6 01/50-12/65
VW Buggy 1.2-1.6 06/68-07/71
VW Baja 1.2-1.6 08/68-12/86
In stock
Bruttó ár: 3 720 Ft / db
Ball joint with split stem, left-hand thread, inner ball joint for the short left-hand connecting rod (so-called split stem). For Beetle, Karmann and Type 181 from 69 until the end of production. 12x1.5 mm (thread of the screw on the moving part of the ball head / pitman arm) 14x1.5 mm (this is the thread of the one in the connecting rod) VW Type 1 NOT SUITABLE FOR 1303 1.2-1.6 06/68-12/86 VW Karmann Ghia 1.3-1.6 06/68-07/74 VW 181 1.5-1.6 09/69-02/79 Porsche 356 /A/B/C 1.1-1.6 01/50-12/65 VW...
In stock
Bruttó ár: 4 680 Ft / db
Ball head, broken stem, with small cone and right-hand thread
Inside for short link for Beetle and Karmann 12/1300 -05/68.
10x1.0 mm (screws to spindle / pitman arm)
14x1.5 mm (threads into the sleeve of the link)
We did not make an ECO out of this ball head, as the lower quality would only be a few forints cheaper, so enjoy the Premium OCAP.
Inside for short link for Beetle and Karmann 12/1300 -05/68.
10x1.0 mm (screws to spindle / pitman arm)
14x1.5 mm (threads into the sleeve of the link)
We did not make an ECO out of this ball head, as the lower quality would only be a few forints cheaper, so enjoy the Premium OCAP.
In stock
Bruttó ár: 4 230 Ft / db
Ball joint, (eye ball joint) the steering damper is connected to. Inner ball joint for the short connecting rod. For Beetle and Karmann 12/1300 -05/68. 10x1.0 mm (screws to the spindle / pitman arm) 14x1.5 mm (threads into the sleeve of the connecting rod)
In stock
Bruttó ár: 7 480 Ft / db
Ball joint (eye ball joint) for connecting the steering damper. Inner ball joint for the short connecting rod. For Beetle and Karmann 12/1300 -05/68. 10x1.0 mm (screws to the spindle / pitman arm) 14x1.5 mm (threads into the sleeve of the connecting rod)
In stock
Bruttó ár: 5 670 Ft / db
Classic Line quality
Ball head with large cone and left-hand thread
12x1.5 mm (screws into spindle / pittman arm)
14x1.5 mm (threaded into pull/push rod sleeve)
Inner ball head, long, for right-hand rod for Beetle, Karmann and Type 181 from 12/1300 06/68.
VW Karmann Ghia 1.3-1.6 06/68-07/74
VW 181 1.5-1.6 09/69-02/79
VW Type 1 not 1303 1.2-1.6 06/68-12/86
VW Buggy 1.2-1.6 06/68-07/71
VW Baja 1.2-1.6 08/68-12/86
Ball head with large cone and left-hand thread
12x1.5 mm (screws into spindle / pittman arm)
14x1.5 mm (threaded into pull/push rod sleeve)
Inner ball head, long, for right-hand rod for Beetle, Karmann and Type 181 from 12/1300 06/68.
VW Karmann Ghia 1.3-1.6 06/68-07/74
VW 181 1.5-1.6 09/69-02/79
VW Type 1 not 1303 1.2-1.6 06/68-12/86
VW Buggy 1.2-1.6 06/68-07/71
VW Baja 1.2-1.6 08/68-12/86
In stock
Bruttó ár: 4 795 Ft / db
Ball head with large cone and left-hand thread 12x1.5 mm (screws into spindle / pittman arm) 14x1.5 mm (threaded into pull/push rod sleeve) Inner ball head, long, for right-hand rod For Beetle, Karmann and Type 181 12/1300 from 06/68. Beetle from 05/68 Karmann Ghia from 05/68 Type 181 all
In stock
Bruttó ár: 6 345 Ft / db
Rod end with large cone and left-hand thread External for short connecting rod Beetle 12/1300 06/68- Internal for short connecting rod Beetle 1302/03 -07/74 Internal left and right inner 08/67-07/79 bus External for short connecting rod type Typ3 08/67- Internal for long connecting rod type Typ3 08/67- Porsche 356 /A/B/C left inner, 1.1-1.6 01/50-12/65 12x1.5 mm (screws to spindle / stub) 14x1.5 mm (threaded into pull/connecting rod sleeve)
In stock
Bruttó ár: 4 230 Ft / db
Ball joint with small cone and left-hand thread External ball joint, for the short connecting rod for Beetle -05/68.-up Inside left and right for the 03/55-07/67 T1 bus. Inside outside for the Type-3 type, both for the short connecting rod and the long rod, where the left-hand thread is needed. Type 3 -07/67.-up 10x1.0 mm (screws to the spindle / pitman arm) 14x1.5 mm (threads into the connecting rod sleeve) Beetle -04/68-up Karmann Ghia -04/68-up Bus -07/67-up Type 3 -07/67-up He didn't make...
In stock
Bruttó ár: 4 230 Ft / db
Ball joint with small cone in the stub (10x1mm) and right-hand thread on the push rod (14x1.5) External ball joint for long rod, Beetle -05/68.-up External ball joint for left and right 03/55-07/67 for Bus T1. External ball joint for long connecting rod type Ty--3 -07/67-up. 10x1.0 mm (screws into spindle / pitman arm) 14x1.5 mm (threads into the connecting rod sleeve)
In stock
Bruttó ár: 3 995 Ft / db
This is the connecting rod for the rack and pinion steering from 1975.
Available to order
Bruttó ár: 21 150 Ft / db
In this set you will find small pin ball heads, which you can find separately under the article numbers 1323 and 1325.
Until May 1968, this must be used in all Beetles and Karmanns on the left side.
Until May 1968, this must be used in all Beetles and Karmanns on the left side.
In stock
Bruttó ár: 17 350 Ft / db
Here are the so-called large-pin ball heads, which are separately 1320 and 1327.
The thread on the moving part of the ball head is 12x1.5 mm, and on the stem that goes into the rod it is 14x1.5 mm.
On the right side is 1329-08.
The thread on the moving part of the ball head is 12x1.5 mm, and on the stem that goes into the rod it is 14x1.5 mm.
On the right side is 1329-08.
In stock
Bruttó ár: 15 510 Ft / db
There is already a steering damper here, but the cone of the ball head is still so-called small-pin. From June 68, the hole in the stub axles became large-pin, until then it was like this. This set contains the ball heads 1323 and 1324. The thread on the moving part of the ball head is 10x1mm, and on the stem that goes into the rod it is 14x1.5mm.
In stock
Bruttó ár: 25 790 Ft / db
This set includes a 1321 and a 1322 eye ball head. The thread on the moving part of the ball head is 12x1.5 mm, and on the stem that goes into the rod it is 14x1.5 mm. On the left side is 1329-07.
In stock
Bruttó ár: 22 560 Ft / db
This rod contains the ball head 1324 and the ball head 1325. There was no steering telescope here yet, the eye ball head was not needed.
In stock
Bruttó ár: 36 380 Ft / db
79
Product
31
60