256
Product
31
60
12
The total length is 200mm.
In stock
Bruttó ár: 1 650 Ft / db
Bruttó ár: 1 880 Ft / db
7
Type 1 engine -'86, Type 3, Type 4 engines for 1700cc, and CT/CZ engines! The best quality available ORIG. From Germany. The matching nut is 1784-2. M8 x 1.0
In stock
Bruttó ár: 1 520 Ft / db
Bruttó ár: 1 640 Ft / db
18
The clip for it is 1768-1, and the seal is 1770-01,
Available to order
Bruttó ár: 4 190 Ft / db
Bruttó ár: 5 140 Ft / db
15
The height is 8cm high on each side!!
In stock
Bruttó ár: 2 420 Ft / db
Bruttó ár: 2 850 Ft / db
10
It is for STD factory valve cover height, that's what the label says, but it's a little higher than the original VW.!!!! Be careful, let's test it too!!
In stock
Bruttó ár: 3 600 Ft / pár
Bruttó ár: 4 020 Ft / pár
28
In stock
Bruttó ár: 5 360 Ft / pár
Bruttó ár: 7 500 Ft / pár
26
Available to order
Bruttó ár: 15 900 Ft / db
Bruttó ár: 21 490 Ft / db
12
In stock
Bruttó ár: 3 230 Ft / db
Bruttó ár: 3 690 Ft / db
15
In stock
Bruttó ár: 13 090 Ft / készlet
Bruttó ár: 15 510 Ft / készlet
28
1782-105 is the part number of the corresponding valve spring.
In stock
Bruttó ár: 13 300 Ft / készlet
Bruttó ár: 18 690 Ft / készlet
21
Intake valve, 40.0 mm, 3 grooves, for 044 cylinder head in OSVAT quality
In stock
Bruttó ár: 10 300 Ft / készlet
Bruttó ár: 13 080 Ft / készlet
NEW
13/1600cc kétportos
15/1600cc egyportos
32 mm, 8 mm-es vezető
4 darabos készlet
15/1600cc egyportos
32 mm, 8 mm-es vezető
4 darabos készlet
Available to order
Bruttó ár: 15 500 Ft / db
NEW
Original, beautiful used aluminum push rods are almost always in stock. Feel free to look for them.
Available to order
Bruttó ár: 3 350 Ft / db
NEW
With a longer neck at one end that goes into the block. This innovation comes from the world of racing and rallying. In fast and sharp corners, the extended neck prevents oil from leaking out, thus preventing oil levels from dropping and engine damage. Of course, it can also be used with standard, factory engines and this ensures a constant supply of oil. Also available in metal (1758) and spring-loaded versions (1761).
In stock
Bruttó ár: 3 740 Ft / db
NEW
The rubber gasket required for installation is available in several qualities. The most common is 1763, the silicone set is 1763-1 (very popular) and is used by those who often build engines.
In stock
Bruttó ár: 1 640 Ft / db
NEW
Scat top quality, the best in performance parts!! Anodized aluminum push rod tubes with spring for the right tension. They consist of two pieces and are supplied with all necessary rubber. They allow assembly without dismantling the cylinder head and are available in sets of 8. The push rod tubes are longer on one side and this side is mounted in the crankcase. This development comes from the racing and rally world and ensures that during sporty bends no oil can flow into the tubes and a temp...
In stock
Bruttó ár: 79 900 Ft / készlet
NEW
The extra-quality valve cover gasket that comes with it is 1770-01, if you want to buy the installation kit separately, it is 1766, but this is included in the set.
In stock
Bruttó ár: 21 030 Ft / db
NEW
13/1600 cm3 kétportos
15/1600 cm3 egyportos
35,5 mm, 8 mm-es vezető
4 darabos készlet
15/1600 cm3 egyportos
35,5 mm, 8 mm-es vezető
4 darabos készlet
Available to order
Bruttó ár: 13 160 Ft / db
VW Type 1 1.2-1.6 12/62-12/86 VW Transporter T2 1.6 (32/34/37 kW) 08/67-07/79 VW 181 1.5-1.6 09/69-02/79 VW Golf/Jetta 1.1-1.6 04/74-07/80 VW Golf 1.0 11/83-10/91 VW Golf/Jetta 1.3 08/83-06/87 VW Golf Cabrio 1.5-1.6 08/82-04/92 VW Karmann Ghia 1.2-1.6 12/62-07/74 VW Scirocco 1.1-1.6 04/74-07/80 VW Transporter T3 1.9 08/82-07/92 VW Transporter T4 1.9-2.4 D TD 09/90-06/03 VW Type 4 1.7-1.8 01/72-03/75
Available to order
Bruttó ár: 1 660 Ft / db
In stock
Bruttó ár: 13 160 Ft / szett
256
Product
31
60