82
Product
31
60
Ventilation grilles next to the rear window. For the model after 1971 that has 3-3 slots on each side! NOT FIT FOR 4-series!!!!
In stock
Bruttó ár: 4 670 Ft / szett
It requires screw 8762-3913.
In stock
Bruttó ár: 2 120 Ft / pár
8762-3913 is the screw.
In stock
Bruttó ár: 1 410 Ft / pár
In stock
Bruttó ár: 3 040 Ft / pár
8762-3913 is the screw.
In stock
Bruttó ár: 1 870 Ft / pár
Available to order
Bruttó ár: 42 170 Ft / pár
On the right is a dressing table with a mirror.
In stock
Bruttó ár: 42 300 Ft / db
In stock
Bruttó ár: 42 170 Ft / pár
Premium TMI quality!!!!
Available to order
Bruttó ár: 84 100 Ft / db
In stock
Bruttó ár: 28 900 Ft / db
Available to order
Bruttó ár: 56 070 Ft / db
Available to order
Bruttó ár: 56 260 Ft / pár
In stock
Bruttó ár: 39 950 Ft / db
Available to order
Bruttó ár: 30 430 Ft / db
Available to order
Bruttó ár: 42 170 Ft / db
Available to order
Bruttó ár: 70 090 Ft / db
100cm, made by Autocraft, so PROFESSIONAL!!
In stock
Bruttó ár: 14 020 Ft / db
This roof lining clamping element is also good for those that did not have roof lining or roof panels. We sell them in 80cm pieces. The Spárkafer beetles lacked this, and if you want a panel or roof lining for the T1 buses, you have to weld this to the roof edge before painting, around the windows or around the ventilation box. However, check out the 2931-205 edge as well, because you have to use them mixed together so that you can properly attach what was not there before. You can find both ...
In stock
Bruttó ár: 7 970 Ft / db
The roof lining is attached to the roof panel frame by steel rods. The steel rods must not touch the roof panel, so vibration and noise damping are necessary, so small rubber caps on the ends of these slats are very important. Don't miss out, the magic lies in the details, and oh, and the silence too.
In stock
Bruttó ár: 5 610 Ft / db
The rubber cap at the end is the 2930.
In stock
Bruttó ár: 23 500 Ft / db
Available to order
Bruttó ár: 197 200 Ft / db
82
Product
31
60