139
Product
1
30
20
NEW
We at BBT are tired of the front hub grease cap that has been available for a long time. To be honest, we hardly used the existing aftermarket products on our own cars. Instead, we preferred NOS or used ones. We thought it was time to make our own, and we totally succeeded. We made it from the same material as the original, the same thickness and size, the same look and finish. Simple and perfect, exactly like the Volkswagen did many years ago. We tested a lot of samples during the production...
In stock
Bruttó ár: 1 860 Ft / db
Bruttó ár: 2 350 Ft / db
35
The installation of the urethane bearing bush simplifies the assembly of the front axle and control arms. It provides sufficient support even when using worn parts. Available for the front axle of the Beetle with pin and ball joints, and the Transporter T1 and T2.
In stock
Bruttó ár: 28 900 Ft / szett
Bruttó ár: 44 510 Ft / szett
24
In stock
Bruttó ár: 12 800 Ft / szett
Bruttó ár: 16 860 Ft / szett
38
This red urethane bushing set replaces needle roller bearings and inner bakelite bushings. Perfect in all areas. In practice, the inner replaces the bakelite bushings and the outer replaces the needle bearings. Urethane is much more resistant, more durable than std rubber, We recommend it for Buggy and sand racers specifically.
In stock
Bruttó ár: 25 900 Ft / szett
Bruttó ár: 42 170 Ft / szett
11
Front suspension urethane silent block set for VW Beetle 1302/03 1.2-1.6 08/69-07/73 models.
In stock
Bruttó ár: 23 900 Ft / szett
Bruttó ár: 27 010 Ft / szett
21
We @ BBT are tired of the front hub grease cap that has been available for a long time. To be honest, we hardly used the existing aftermarket products on our own cars. Instead, we preferred NOS or used ones. We thought it was time to make our own, and we totally succeeded. We made it from the same material as the original, the same material thickness and size, the same look and finish. Simple and perfect, exactly like the Volkswagen many years ago. We tested a lot of samples during the produc...
In stock
Bruttó ár: 1 850 Ft / db
Bruttó ár: 2 350 Ft / db
5
In stock
Bruttó ár: 213 900 Ft / db
Bruttó ár: 225 600 Ft / db
19
In stock
Bruttó ár: 173 530 Ft / db
Bruttó ár: 215 540 Ft / db
23
In stock
Bruttó ár: 179 900 Ft / db
Bruttó ár: 235 000 Ft / db
30
In stock
Bruttó ár: 109 150 Ft / db
Bruttó ár: 156 961 Ft / db
25
Available to order
Bruttó ár: 66 270 Ft / készlet
Bruttó ár: 89 030 Ft / készlet
34
Use the easy-to-install stainless steel clamp set 1351-1. For Beetles, Karmanns or Type 181s manufactured after August 1964 with ball joints. For a planted car. It doesn't matter whether you install it on a planted car with a Puma suspension or on a planted axle stub. In EMPI quality, with urethane bushings in the package. Stabilizer, front, for ball joint suspension, recessed. Thicker, 3/4 inch, made of steel, galvanized. With urethane bushings.
In stock
Bruttó ár: 58 490 Ft / készlet
Bruttó ár: 88 780 Ft / készlet
13
Hinge pin bushing horizontal parts. Classic Line quality!!
In stock
Bruttó ár: 30 990 Ft / készlet
Bruttó ár: 35 980 Ft / készlet
34
Ball head with base for the 1303 running gear after August 1973, for the version with screw fastening on both sides.
In stock
Bruttó ár: 5 500 Ft / db
Bruttó ár: 8 430 Ft / db
50
What is not on sale is the Febi Bilstein, Germany, the OCAP quality on sale. In addition, you can also find the Eco version, which is classic Line.
In stock
Bruttó ár: 8 390 Ft / db
Bruttó ár: 16 860 Ft / db
16
Classic Line quality.
In stock
Bruttó ár: 4 190 Ft / db
Bruttó ár: 4 990 Ft / db
19
In stock
Bruttó ár: 3 790 Ft / db
Bruttó ár: 4 700 Ft / db
19
In stock
Bruttó ár: 3 790 Ft / db
Bruttó ár: 4 700 Ft / db
12
In stock
Bruttó ár: 12 990 Ft / szett
Bruttó ár: 14 840 Ft / szett
21
You don't need a shorter shock absorber, the factory one is enough. Up to 73, the 1315-1, and from 1315 and 74, the 1317, 1317-oil, or 1317-ECO 1386-100 rubber goes under the spring.
In stock
Bruttó ár: 34 990 Ft / pár
Bruttó ár: 44 650 Ft / pár
27
Rubber under coil spring, 1302/03
1386-200
In stock
Bruttó ár: 2 190 Ft / db
Bruttó ár: 3 040 Ft / db
33
Without a doubt one of the best parts produced in recent years. Finally we can get rid of the water pump pliers, hammer and all the other tools that are difficult to get. These clamps are used to secure the front sway bar rods and the connecting rods. Made of stainless steel. 4 pieces, 2 large, + 2 small.
Available to order
Bruttó ár: 23 360 Ft / készlet
Bruttó ár: 35 140 Ft / készlet
9
In stock
Bruttó ár: 29 900 Ft / db
Bruttó ár: 32 900 Ft / db
9
In stock
Bruttó ár: 29 900 Ft / db
Bruttó ár: 32 900 Ft / db
11
Itt ezt úgy tudod jól beazonosítani, hogy ennek az alsó támasztó gömbfeje az alulról 3 csavaros, ennek megfelelö a gólyaláb.
In stock
Bruttó ár: 28 990 Ft / db
Bruttó ár: 32 710 Ft / db
23
Tower Silence, 1303 08/73-
1388-1
The tower silencer cap is 1388-200, finally you can get this too!! 1314-110 is the rubber bumper for the telescope stem. If this is not on, the telescope will have a much shorter life.
In stock
Bruttó ár: 25 100 Ft / db
Bruttó ár: 32 710 Ft / db
NEW
Locking washer between the two spindle nuts. The corresponding nuts are 1361-3 and 1361-4. 1361 is the part number of the front hub bearing set. Beetle -07/65 to Karmann Ghia -07/65 to Bus 08/63-07/67 Bus Brazil from 01/67.
In stock
Bruttó ár: 240 Ft / db
NEW
40 x 52/58 x 8.5mm, Febi Bilstein, Premium Quality! Beetle and Kamnann Ghia from 1967/08 Wheel bearings are clearly one of the parts of classic cars that are subject to wear. Wheel bearings have been available from stock for years. However, we often receive requests for separate bearings and especially for grease seals (hub seals). Consequently, our purchasing department has done a lot of research in order to be able to offer wheel bearings and seals (hub seals) from stock for Beetles Type 1,...
In stock
Bruttó ár: 1 410 Ft / db
NEW
Beetle enthusiasts are undoubtedly familiar with the features of the MC Pherson front suspension, which was developed for these models. Not only were these models extremely well steerable, but they also have some weak points. One of these is that abnormal vibrations can develop due to wear or overuse, which gives the user an unpleasant driving and comfort experience. This is why BBT has a wide range of suspension parts. This control arm bushing is suitable for 1302-03 models used until 1973. ...
In stock
Bruttó ár: 4 210 Ft / db
NEW
We @ BBT are tired of the front hub grease cap that has been available for a long time. To be honest, we hardly used the existing aftermarket products on our own cars. Instead, we preferred NOS or used ones. We thought it was time to make our own, and we totally succeeded. We made it from the same material as the original, the same material thickness and size, the same look and finish. Simple and perfect, exactly like the Volkswagen many years ago. We tested a lot of samples during the produc...
In stock
Bruttó ár: 2 340 Ft / db
139
Product
1
30